Image for illustration purposes only

DIN6325 Metric Hardened & Ground Dowels are produced to a precise Interference fit. Our standard metric size range is from 1mm up to 25mm diameter and is produced from material 1.3505 (100cr6) Through Hardened to HRC58-62. This pin is configured to have a radius at one end and a ‘crown’ at the other – a crown can be more easily described as a radius on top of a chamfer.

If you require chamfered end pins instead of rad/crown configuration please refer to our specifcation A01.

Metric sizes are offered with an 'm6' tolerance band which is explained more clearly in the chart below.

Diameter Range Tolerance Band (m6)
From 0 to 3mm +0.002 / +0.009mm
From 3 to 6mm +0.004 / +0.012mm
From 6 to 10mm +0.006 / +0.015mm
From 10 to 18mm +0.007 / +0.018mm
From 18 to 30mm +0.008 / +0.021mm

Sizes outside of this range can be produced to order, please enquire.

Product Standard descriptionDowel Pins, DIN6325
Pinco Part NumberT01
DIN6325
Standard Stock rangeDIN 6325

Click on any of the following links to download the file.

Adobe Acrobat Reader

There are no reviews for this product yet. Be the first to add one!